–
| When installing the pressure line it is essential to pay attention to the fitting location → Chapter. |
–
| Mount return line with new O-ring on the power steering gear. |
–
| Attach a pressure line tightly with new seals to the power steering gear → Chapter. |
–
| Screw return line with new O-ring onto the engine pump aggregate. |
Further installation occurs in reverse order, while paying attention to the following: |
–
| Filling with hydraulic oil and bleeding the steering system → Chapter. |
Caution If after the test drive and with the front wheels pointing straight ahead the steering wheel is off straight, perform a chassis alignment → Chapter. |
|
|
|
|