skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Assembling reservoir > < Replace reservoir of engine pump aggregate KOYO

Fabia Mk1

Disassemble reservoir:
Disassemble reservoir:
–  Removing engine pump aggregate → Chapter
After extraction of the hydraulic oil there will be residues in the engine pump aggregate.
–  Close screw connection for the pressure line at the engine pump aggregate.
–  If fitted, remove encapsulation from engine pump aggregate.
   
Reservoir attached with cap nuts and fillister head screws
–  Unscrew cap nuts -arrows A-.
–  Unscrew fillister head screws -arrows B-.
–  Detach reservoir from the engine pump aggregate.
  S48-0280
Reservoir attached with fillister head screws
–  Unscrew fillister head screws -arrows A-.
–  Unscrew fillister head screws -arrows B-.
  Note
  S48-0280
When detaching the reservoir -1-, one must absolutely counterhold at pump aggregate -2-
  Caution
The pump aggregate -2- must on no account be pulled out from the housing with power-assisted steering control unit -J500--3-. A separation leads to damage at the engine pump aggregate, which cannot be eliminated with workshop possibilities.
–  Carefully detach reservoir -1- from pump aggregate -2-.
  S48-0281

Assembling reservoir > < Replace reservoir of engine pump aggregate KOYO