| Check accelerator pedal position sender |
| The two accelerator pedal position senders -G79 - and -G185- are located at the accelerator pedal and transmit the driver's instruction to the engine control unit fully independently of one another. Both senders are located in a housing. |
| Special tools and workshop equipment required |
| t
| Vehicle system tester -V.A.G 1552 - |
| t
| Diagnostic cable -V.A.G 1551/3- or -V.A.G 1551/3A- or -V.A.G 1551/3B- |
| t
| Hand multimeter (e.g. -V.A.G 1526 A-) |
| t
| Adapter cable set (e.g. -V.A.G 1594 A-) |
| t
| Test box -V.A.G 1598/31- |
|
|
|
