Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing valves >
< Repairing cylinder head
Fabia Mk1
Drive unit
1.0/37; 1.4/44; 1.4/50 kW MPI engine
Engine cylinder head, valve gear
Repairing cylinder head
Inspect valve guides
Inspect valve guides
Inspect valve guides
Special tools and workshop equipment required
t
Universal dial gauge holder -MP3-447-
t
Dial gauge
Work procedure
–
Insert valve into guide. End of valve stem must be flush with guide.
–
Determine valve rock.
Wear limit
Inlet valve
Exhaust valve
0.5 mm
0.6 mm
Note
t
If the wear limit is exceeded, repeat measurement with new valve. If the wear limit is again exceeded - replace cylinder head.
t
If the valve is replaced when carrying out repair work, use a new valve for the measurement.
Drive unit
1.0/37; 1.4/44; 1.4/50 kW MPI engine
Engine cylinder head, valve gear
Repairing cylinder head
Inspect valve guides
Removing and installing valves >
< Repairing cylinder head