Fabia Mk1
| Disassembling and assembling the air filter |
| For engines with engine identification characters AUA, AUB, BBY, BKY, BBZ |
| 1 - | Air filter top part |
| 2 - | Gasket |
| q | replace if damaged |
| 3 - | Filter insert |
| 4 - | Air filter bottom part |
| 5 - | Rubber holder |
| 6 - | 3 Nm |
| 7 - | Gasket ring |
| q | check for firm seating |
| q | replace if damaged |
| 8 - | Inlet connection with control flap |
| q | Testing intake manifold preheating → Chapter |
| For engine with engine identification characters BUD |
| 1 - | 3 Nm |
| q | Air filter top part to air filter bottom part are connected with self-cutting screws. If these screws are released or tightened with a screwdriver, the connected components can be damaged. |
| q | This is why the use of a screwdriver is only permitted if: |
| q | the screwdriver speed max 200 rpm |
| q | the tightening torque max. 3 Nm. |
| 2 - | Upper part of air filter housing |
| 3 - | Gasket ring |
| 4 - | One-way valve |
| 5 - | Hose |
| q | to camshaft housing |
| 6 - | Inlet hose |
| 7 - | Spring strap clamp |
| q | to remove and install use pliers for spring strap clips |
| 8 - | Gasket ring |
| 9 - | Rubber grommet |
| 10 - | Air filter bottom part |
| 11 - | Air filter element |
