Fabia Mk1
Disassembling and assembling intake manifold |
The intake manifold flap closes for about 3 seconds after switching off the engine and then opens again. This reduces the switch-off impact. |
For engine with identification characters AMF |
1 - | Intake manifold |
2 - | O-ring |
q | replace |
3 - | Induction pipe |
q | with mechanical exhaust gas recirculation valve and intake manifold flap |
4 - | Mechanical exhaust gas recirculation valve |
5 - | 10 Nm |
6 - | Bracket |
7 - | Vacuum setting element |
q | For intake manifold flap |
8 - | 25 Nm |
9 - | Connection pipe for exhaust gas recirculation |
q | to exhaust manifold |
10 - | Gasket |
q | replace |
For engine with identification characters BNM, BNV |
1 - | Intake manifold |
2 - | Induction pipe |
q | with mechanical exhaust gas recirculation valve |
3 - | O-ring |
q | replace |
4 - | 10 Nm |
5 - | from charge-air cooler |
6 - | Intake manifold flap motor -V157- |
7 - | 10 Nm |