Fabia Mk1
Summary of components - Vehicles with air conditioning |
Note
t | Mark the rotation direction before removing the V-ribbed belt. Reversing the rotation direction of an already used belt may destroy it. |
t | Pay attention to the correct position of the V-ribbed belt in the belt pulley when installing it. |
1 - | 10 Nm + torque a further 1/4 turn (90°) |
2 - | Vibration damper/belt pulley |
q | assembly only possible in one position -holes offset- |
3 - | 25 Nm |
4 - | Generator |
q | to facilitate the positioning of the generator on the holder drive the threaded bushings of the retaining screws slightly backwards |
5 - | Tensioner for V-ribbed belt |
6 - | Bracket |
q | for generator and AC compressor |
q | Dowel sleeve for centering → Fig. |
7 - | 25 Nm |
8 - | 45 Nm |
9 - | Bracket |
q | for bottom charge-air pipe |
10 - | 8 Nm |
11 - | 25 Nm |
12 - | AC compressor |
13 - | Dowel sleeves for AC compressor |
q | must be present in holder → Item |
14 - | V-ribbed belt |
q | removing → Chapter |
q | installing → Chapter |
|