Fabia Mk1
| Removing and installing parts of the exhaust system |
Note| t | The exhaust turbocharger is a component part of the exhaust manifold and therefore must not be replaced individually; removing and installing → Chapter. |
| t | Always replace gaskets and self-locking nuts. |
| 1 - | Gasket |
| q | replace |
| 2 - | Front exhaust pipe with catalytic converter |
| 3 - | 25 Nm |
| q | replace |
| q | before installing, coat stud bolts with hot bolt paste G 052 112 A3 |
| 4 - | Retaining strap |
| q | Press off from cross member → Item when removing middle silencer with catalytic converter |
| 5 - | Cross member |
| 6 - | 25 Nm |
| 7 - | Double clamp |
| q | Align exhaust system free of stress before tightening → Chapter |
| q | Fitting position: bolts at bottom and horizontal |
| q | Tighten bolted connections evenly |
| 8 - | 40 Nm |
| q | replace |
| 9 - | Hanger |
| 10 - | Separation point |
| q | for repairs → Chapter |
| 11 - | Middle and rear silencer 07.03 ► |
| q | replace individually when carrying out repairs → Chapter |
| q | Align exhaust system free of stress → Chapter |
| 12 - | Middle and rear silencer ► 06.03 |
| q | replace individually when carrying out repairs → Chapter |
| q | Align exhaust system free of stress → Chapter |