The installation of the gearbox occurs in reverse order. Observe the stress-free assembly bracket in the vehicle → Engine → Rep. Gr.10. |
Bolts and other attachments that come into contact with the gearbox can have varying finishes depending on whether the gearbox is made of aluminium or magnesium. |
–
| After installing, check gear oil level in the gearbox and if necessary top up with gear oil → Chapter. |
Note t
| Clean splines of drive shaft and apply a thin film of grease for plug serration of clutch disc -G 000 100 -. |
t
| The clutch plate must slide freely up and down the drive shaft. |
t
| If the gearbox is inserted, ensure the intermediate plate between the engine and gearbox is correctly installed. |
t
| Check whether the dowel sleeves for centering the gearbox are present in the cylinder block; insert if necessary. |
t
| Attach the shift mechanism to the gearbox → Chapter. |
|
|
|