Fabia Mk1
Hydraulics - Summary of components |
1 - | Brake fluid reservoir |
2 - | Tubing |
q | out of rubber |
q | as of 12.05 on certain vehicles out of plastic → Fig. |
3 - | Master cylinder |
q | removing and installing → Chapter |
4 - | Support |
q | only replace if the master cylinder has been removed |
q | dismantling → Fig. |
q | push on → Fig. |
5 - | Clutch pedal |
q | removing and installing → Chapter |
6 - | 25 Nm |
q | self-locking |
q | replace → Electronic Catalogue of Original Parts |
7 - | O-ring |
q | replace → Electronic Catalogue of Original Parts |
q | pull onto line connection |
q | insert with brake fluid |
q | Gasket rings/O-rings adapted to the line connection → Fig. |
8 - | Tube-hose line |
9 - | Bracket |
q | Mounted at the structure |
10 - | O-ring |
q | replace → Electronic Catalogue of Original Parts |
q | pull onto line connection |
q | insert with brake fluid |
q | Gasket rings/O-rings adapted to the line connection → Fig. |
11 - | Breather |
12 - | O-ring |
q | replace → Electronic Catalogue of Original Parts |
q | pull onto connection |
q | insert with brake fluid |
q | Gasket rings/O-rings adapted to the line connection → Fig. |
13 - | Retaining clip |
q | to remove and install pull out the retaining clip only up to the stop. |
14 - | Bleed valve |
q | Bleed the clutch system → Chapter |
15 - | Dust cap |
16 - | Retaining clip |
q | to remove and install pull out the bleeder only up to the stop. |
17 - | Slave cylinder |
q | for removing and installing, remove gearbox → Chapter |
18 - | Retaining clip |
q | to remove and install pull out the retaining clip only up to the stop. |
|
|
|
Pos. | Version of line connection |
1 | Line connection with round slot -arrow 1- |
2 | Line connection with shoulder -arrow 2- |
|