skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Bleeding the clutch system > < Hydraulics - Summary of components

Fabia Mk1

Removing and installing the master cylinder
Removing and installing the master cylinder
Removing
–  Remove bracket for clutch pedal together with master cylinder → Chapter.
–  Removing the over-centre helper spring → Chapter.
–  Unhook the bearing/over-centre helper spring from the bearing.
–  Unscrew pedal stop.
–  Remove the master cylinder.
Install
Installation is performed in the reverse order. Pay attention to the following points:
–  Installing the over-centre helper spring → Chapter.
–  Install bracket for clutch pedal together with master cylinder → Chapter.
   
–  The support -A- must be located on the actuating rod -B- of the master cylinder.
–  To click in the support push the clutch pedal towards the front wall -direction of the arrow- and make sure it catches correctly.
–  After installing the master cylinder bleed the clutch system → Chapter.
  V30-0419

Bleeding the clutch system > < Hydraulics - Summary of components