Fabia Mk1
| Radiator with a radiator fan - Summary of components |
| 1 - | Radiator |
| q | removing and installing → Chapter |
| q | after replacing fill entire system with fresh coolant |
| 2 - | O-ring |
| q | replace |
| 3 - | Top coolant hose |
| q | secure to radiator with retaining clip |
| q | Connection diagram for coolant hoses: |
| t | for engines with identification characters AUA, AUB, BBY, BBZ, BKY → Chapter |
| t | for engine with identification characters BUD → Chapter |
| 4 - | Coolant hose |
| 5 - | Fan shroud |
| q | pay attention to different versions of fan shrouds |
| 6 - | 10 Nm |
| 7 - | Retaining clip |
| q | check tightness |
| 8 - | Fan holder |
| 9 - | Connector |
| 10 - | Radiator fan |
| 11 - | To coolant regulator housing or to coolant pipe |
| q | Connection diagram for coolant hoses: |
| t | for engines with identification characters AUA, AUB, BBY, BBZ, BKY → Chapter |
| t | for engine with identification characters BUD → Chapter |
| 12 - | Expansion reservoir |
| q | Check the cooling system for tightness → Chapter |
| 13 - | Screw cap |
| q | Check pressure relief valve → Chapter |
| 14 - | Bottom coolant hose |
| q | with drain valve at radiator |
| q | secure to radiator with retaining clip |
| q | Connection diagram for coolant hoses: |
| t | for engines with identification characters AUA, AUB, BBY, BBZ, BKY → Chapter |
| t | for engine with identification characters BUD → Chapter |
| 15 - | Thermoswitch -F18-, 35 Nm |
| q | for electric fan |
| q | switching temperatures: |
| 1. Stage on: 92...97°C |
| 1. Stage off: 84...91°C |
| 2. Stage on: 99...105°C |
| 2. Stage off: 91...98°C |
| 16 - | Radiator support |
| q | Check fitting position |
| q | pay attention to different versions |
| 17 - | 10 Nm |
