Fabia Mk1
Radiator with two radiator fans - Summary of components |
1 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
2 - | O-ring |
q | replace |
3 - | Top coolant hose |
q | secure to radiator with retaining clip |
q | Connection diagram for coolant hoses: |
t | for engines with identification characters AUA, AUB, BBY, BBZ, BKY → Chapter |
t | for engine with identification characters BUD → Chapter |
4 - | Fan shroud |
5 - | 10 Nm |
6 - | Auxiliary fan |
q | on vehicles with additional equipment |
7 - | Fan holder |
8 - | Retaining clip |
q | check tightness |
9 - | Connector |
10 - | Radiator fan |
11 - | To coolant regulator housing or to coolant pipe |
q | Connection diagram for coolant hoses: |
t | for engines with identification characters AUA, AUB, BBY, BBZ, BKY → Chapter |
t | for engine with identification characters BUD → Chapter |
12 - | Expansion reservoir |
q | Check the cooling system for tightness → Chapter |
13 - | Screw cap |
q | Check pressure relief valve → Chapter |
14 - | Support |
q | for plug of fan |
15 - | Bottom coolant hose |
q | with drain valve at radiator |
q | secure to radiator with retaining clip |
q | Connection diagram for coolant hoses: |
t | for engines with identification characters AUA, AUB, BBY, BBZ, BKY → Chapter |
t | for engine with identification characters BUD → Chapter |
16 - | O-ring |
q | replace |
17 - | Thermoswitch -F18-, 35 Nm |
q | for electric fan |
q | switching temperatures: |
1. Stage on: 92...97°C |
1. Stage off: 84...91°C |
2. Stage on: 99...105°C |
2. Stage off: 91...98°C |
18 - | Radiator support |
q | Check fitting position |
q | pay attention to different versions |
19 - | 10 Nm |