Removing and installing the cylinder head |
Special tools and workshop equipment required |
t
| Supporting device -MP9-200 (10-222A)- |
t
| Counterholder -T30004- with replaceable bolts -T30004/1- |
t
| Catch pan, e.g. -VAS 6208- |
t
| Sealant remover gasket stripper (bearing code GST, bearing article no. R 34402), manufacturer Retech s.r.o. |
l
| Engine temperature should not exceed 35 °C, because the cylinder head could be twisted when slackening the screws. |
l
| The pistons must not be in TDC. |
|
|
|