Fabia Mk1
Ignition system - Summary of components (for engines with identification characters BBZ, BBY, BKY, BUD) |
1 - | Connector |
q | black, 4 pin |
2 - | Ignition coil with a power output stage -(N70, N127, N291, N292)- |
q | removing and installing → Chapter |
3 - | Connector |
q | black, 2 pin |
q | for knock sensor 1 -G61- |
q | contacts gold-plated |
4 - | Knock sensor 1 -G61- |
q | Contacts of connector gold-plated |
5 - | 20 Nm |
q | the tightening torque influences the knock sensor function |
6 - | Connector |
q | black, 3 pin |
q | for hall sender -G40- |
7 - | Hall sender -G40- |
8 - | O-ring |
q | replace if damaged |
9 - | 10 Nm |
10 - | Spark plug, 30 Nm |
q | use spark plug wrench, e.g. -3122 B- for removing and installing |
q | Type and electrode spacing → BookletFabia. |
11 - | Cable guide |
12 - | Earth lead |
13 - | 10 Nm |
q | only loosen or tighten with the ignition off |