| –
| Position extractor -T10094A- onto the ignition coil with power output stage in the -direction of the arrow-. |
| –
| Slightly pull out the ignition coil with power output stage. |
| –
| Position the assembly device -T10118- as shown. |
| –
| Carefully release the connector catch and unplug the connector. |
| –
| Position extractor -T10094A- onto the ignition coil with power output stage. |
| –
| Loosely insert ignition coil in the cylinder head. |
| –
| Push connector onto the ignition coil with power output stage until it audibly locks into place. |
| –
| Press the ignition coil with power output stage with extractor -T10094A- onto the spark plug in the cylinder head. |
|
|
|
