skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Cooling system attached to engine - Summary of components > < Parts of cooling system - Summary of components
Parts of cooling system on the side next to the body - Summary of components
   
Parts of cooling system on the side next to the body - Summary of components
1 - Radiator
q   removing and installing → Chapter
q   after replacing fill entire system with fresh coolant → Chapter
2 - O-ring
q   replace
3 - Top coolant hose
q   attached to radiator by retaining clips
q   connection diagram for coolant hoses → Chapter
4 - Screw cap
q   check → Chapter
5 - Connector
6 - Double screw, 2 Nm
7 - Fan shroud
8 - 5 Nm
9 - 5 Nm
10 - Expansion reservoir
q   Check the cooling system for tightness → Chapter
q   connection diagram for coolant hoses → Chapter
11 - Retaining clip
q   for fan cable
q   check tightness
12 - Auxiliary fan
q   for vehicles with air conditioning system or additional equipment
13 - Fan holder
14 - Radiator fan
15 - Bottom coolant hose
q   attached to radiator by retaining clips
q   connection diagram for coolant hoses → Chapter
16 - Support
q   for plug of fan
17 - Thermo-switch for radiator fan -F18-, 35 Nm
q   or for both fans
q   switching temperatures:
1. Stage
t  on: 91 to 97 °C
t  off: 84 to 91 °C
2. Stage
t  on: 99 to 105 °C
t  off: 91 to 98 °C
18 - Bottom radiator bearing
q   black
19 - 5 Nm
20 - Top radiator bearing
q   white

   

Cooling system attached to engine - Summary of components > < Parts of cooling system - Summary of components