Fabia Mk1
| Exhaust gas system - Summary of components |
Note| Always replace gaskets and self-locking nuts. |
| 1 - | Gasket |
| q | replace |
| 2 - | Exhaust manifold |
| q | with connection for exhaust gas recirculation valve → Chapter |
| q | to remove take off intake manifold → Chapter |
| 3 - | Washer |
| 4 - | 25 Nm |
| q | replace |
| q | insert stud bolts with hot bolt paste -G 052 112 A3- |
| 5 - | Exhaust pipe with catalytic converter |
| 6 - | Lifting eye |
| q | to remove the pre-exhaust pipe with catalytic converter, press off from the bracket Pos. 7 |
| 7 - | Clamp |
| 8 - | 25 Nm |
| 9 - | Clamping sleeve |
| q | align exhaust system free of stress before tightening → Chapter |
| q | Fitting position: bolts at bottom and horizontal |
| q | Tighten bolted connections evenly |
| 10 - | 40 Nm |
| q | replace |
| 11 - | Hanger |
| 12 - | Hanger |
| 13 - | Separation point |
| q | for repairs → Chapter |
| 14 - | Middle and rear silencer |
| q | Replace individually when carrying out repairs → Chapter |
| q | Align exhaust system free of stress → Chapter |
| 15 - | 40 Nm |
| q | replace |
| q | coat stud bolts of exhaust manifold with hot bolt paste -G 052 112 A3- before installing. |
