Skoda Workshop Service and Repair Manuals

Separating quick couplings Special tools and workshop equipment required t  Lever -T10468- Assign quick couplings   Note Quick couplings of fuel, vacuum and ventilation lines are colour marked. Either the colour point at the quick coupling or the release button has the corresponding colour.

Quick coupling		Colour coding at the quick coupling
Fuel feed line		Black
Fuel return-flow line		Blue
Vent line		White, beige
Vacuum line		Green

WARNING The fuel feed line is pressurized! Wear safety goggles and safety clothing, in order to avoid injuries and skin contact with fuel. Place cleaning cloths around the connection point before detaching hose connections. Reduce pressure by carefully removing the hose. Version 1

Quick coupling with release buttons -arrows- on right and left. Open

The separation point -1- in the engine compartment must be held. –  Insert the lever -T10468- between the heat shield and the stop -arrow- of the fuel feed line -2- and hold it. Continued for all separation points

–  Press quick coupling -1- in -direction of arrow A-. –  Press the release buttons and detach the quick coupling -1- in -direction of arrow B- from the fuel flow line -2-. Pay attention to the colour assignment when installing → Anchor. –  Check the quick coupling for firm seating by pulling in the opposite direction! Version 2

Quick coupling with pull release -arrow-. Open

–  Press quick coupling -1- in -direction of arrow A-. –  Pull on the pull release -2- in -direction of arrow B-. –  Detach the quick coupling -1- in -direction of arrow B- from the fuel flow line -3-. Pay attention to the colour assignment when installing → Anchor. –  Check the quick coupling for firm seating by pulling in the opposite direction! Version 3

Quick coupling with front release button -arrow-. Open –  Press the release button -arrow- and detach the quick coupling. Pay attention to the colour assignment when installing → Anchor. –  Check the quick coupling for firm seating by pulling in the opposite direction! Version 4

Quick coupling with release buttons -arrows- on right and left. Open –  Press quick coupling in -direction of arrow A-. –  Press release buttons -arrows- and detach quick coupling. Pay attention to the colour assignment when installing → Anchor. –  Check the quick coupling for firm seating by pulling in the opposite direction! Version 5

Quick coupling with release buttons -arrows- on right and left. Open –  Press release buttons -arrows- and detach quick coupling. Pay attention to the colour assignment when installing → Anchor. –  Check the quick coupling for firm seating by pulling in the opposite direction!