Fabia Mk1
|
1 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
2 - | O-ring |
q | replace |
3 - | Top coolant hose |
q | attached to radiator by retaining clips |
q | connection diagram for coolant hoses → Chapter |
4 - | Screw cap |
q | check pressure → Chapter |
5 - | Connector |
6 - | Double screw, 2 Nm |
7 - | Fan shroud |
8 - | 5 Nm |
9 - | Expansion reservoir |
q | Check the cooling system for tightness → Chapter |
q | connection diagram for coolant hoses → Chapter |
q | with coolant shortage warning light sender -G32- |
10 - | Fan holder |
11 - | Retaining clip |
q | for fan cable |
12 - | Radiator fan |
13 - | Support |
q | for plug of fan |
14 - | Bottom coolant hose |
q | with drain valve |
q | connection diagram for coolant hoses → Chapter |
15 - | Thermo-switch for radiator fan -F18-, 35 Nm |
q | switching temperatures: |
1. Stage |
t | on: 91...97°C |
t | off: 84...91°C |
2. Stage |
t | on: 99...105°C |
t | off: 91...98°C |
16 - | Bottom radiator bearing |
q | black |
17 - | 5 Nm |
18 - | Top radiator bearing |
q | white |
|
1 - | Radiator |
q | only complete with radiator fan |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
2 - | O-ring |
q | replace if damaged |
3 - | Top coolant hose |
q | To connection fitting at cylinder head |
4 - | Coolant hose |
q | to the expansion reservoir |
5 - | Screw cap |
6 - | Connector |
7 - | Double screw, 2 Nm |
8 - | Expansion reservoir |
q | with coolant shortage warning light sender -G32- |
q | Check the cooling system for tightness → Chapter |
q | connection diagram for coolant hoses → Chapter |
9 - | Radiator fan -V7- |
10 - | 5 Nm |
11 - | Bottom coolant hose |
q | check tightness |
q | connection diagram for coolant hoses → Chapter |
12 - | Thermo-switch for radiator fan -F18-, 35 Nm |
q | switching temperatures |
1. Stage |
t | on: 91 ... 97 °C |
t | off: 84 ... 91 °C |
2. Stage |
t | on: 99 ... 105 °C |
t | off: 91 ... 98 °C |