Fabia Mk1
Oil filter holder - Summary of components |
1 - | Screw cap, 30 Nm |
q | with gasket |
q | for pressure control valve approx. 0.4 MPa (4.0 bar) |
2 - | Gasket |
q | replace |
3 - | Sealing ring |
q | push on as far as collar of connecting tube -pos. 4- |
4 - | Screw cap |
5 - | Retaining clip |
6 - | Screw plug, 15 Nm |
7 - | Sealing ring |
q | cut open if leaking and replace |
8 - | Oil pressure switch -F1-, 25 Nm |
q | 0.12 - 0.16 MPa (1.2 - 1.6 bar), black |
q | check → Chapter |
9 - | Sealing ring |
q | cut open if leaking and replace |
10 - | Oil filter holder |
q | for pressure control valve approx. 0.4 MPa (4.0 bar) and oil return-flow check tube |
11 - | 15 Nm + torque a further 90° (1/4 turn) |
q | replace |
12 - | Gasket |
q | replace |
q | insert into the lugs on the engine oil cooler |
13 - | Engine oil cooler |
q | ensure clearance to surrounding components |
q | pay attention to the notes → Chapter |
14 - | 25 Nm |
15 - | Oil filter |
q | slacken with tensioning strap |
q | tighten by hand |
q | pay attention to installation instructions on oil filter |