skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Inspecting proper operation and power supply > < Removing and installing the fuel tank
Inspecting the fuel pump and fuel supply
Inspecting the fuel pump and fuel supply
Special tools and workshop equipment required
t  Multimeter, e.g. -V.A.G 1526 A-
t  Multimeter with current controlled pliers e. g. -V.A.G 1715-
t  Remote control, e.g. -V.A.G 1348/3A-
t  Vehicle system tester -V.A.G 1552- with cable -V.A.G 1551/3, 3A, 3B oder 3C-
t  Adapter cable set, e.g. -V.A.G 1594 A- or -V.A.G 1594 C-
t  Wrench for union nut -MP1-227 (3217)-
t  Pressure gauge, e.g. -V.A.G 1318-
t  Adapter, e.g. -V.A.G 1318/1-
t  Adapter, e.g. -V.A.G 1318/11-
t  Adapter, e.g. -V.A.G 1318/17-
t  Adapter, e.g. -V.A.G 1318/23-
t  Measuring vessel
t  Current flow diagram
Test conditions
l  Battery voltage at least 11.5 volts
   
l  Fuse no. 61 o.k.
  S01-0094

Inspecting proper operation and power supply > < Removing and installing the fuel tank