–
| Detach the return-flow line -Pos. 5- and the vent line -Pos. 4- at the fuel tank by pressing the buttons -1- and -2- on the hose connections. |
–
| Unscrew tensioning strap. |
–
| Position the engine/gearbox jack -V.A.G 1383 A- under the fuel tank for support. |
–
| Unscrew the fixing screws from the fuel tank. |
–
| With the assistance of a 2nd mechanic remove the fuel tank. |
Installation is performed in the reverse order; pay attention to the following points: |
t
| Check vent and fuel hoses for damage. |
t
| Make sure the fuel hoses fit tightly. |
t
| Do not mix up the feed and ventilation lines. |
Note After installing the fuel tank, check whether the feed, return-flow and vent lines are clipped in place on the fuel tank. |
|
|
|