skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Control unit for traffic information over the radio J559 (TMC box) > < Contact assignment of multipin plug connections I, II, III

Fabia Mk1

Removing and installing Radio-Navigation System
Removing and installing Radio-Navigation System
  Note
The part number for the complete Radio-Navigation System is indicated on a sticker on the housing of the Radio-Navigation System!
Special tools and workshop equipment required
t  Release tool -T 10057 - (two sets)
Removing
  Note
Determine the code number of the Radio-Navigation System before removing it. If the Radio-Navigation System is replaced, the electronic anti-theft lock should be activated (refer to Operating Instructions). The new code number must be advised to the customer.
   
–  Insert release tools into the slots until they lock in place.
–  Pull Radio-Navigation System out of the dash panel by holding at the eyes of the release tools.
–  Unlock plug connections and separate.
Pull off release tools:
  S91-0037
–  Press locking catch -arrow- and pull out release tools.
Install
–  Fit together plug connections at Radio-Navigation System.
–  Insert Radio-Navigation System straight into the dash panel until it locks in place.
  Note
When inserting the navigation unit on no account press on the display or on the operating buttons otherwise the navigation unit will be damaged.
  S91-0038

Control unit for traffic information over the radio J559 (TMC box) > < Contact assignment of multipin plug connections I, II, III