skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Radio systems II > < Replacing aerial cables
Contact assignment of multipin plug connections A, B, C on rear of radio
Contact assignment of multipin plug connections A, B, C on rear of radio
Radios MS 202, 402, 502 and Symphony
   
Multipin plug connection a, 8-pin
1 - “Gala” function (volume adaptation depending on vehicle speed)
2 - Mute (telephone mode)
3 - Self-diagnosis/K wire
4 - Connection for ignition key-controlled On / Off
5 - Terminal 30 (not assigned to radio sets Symphony)
6 - Lighting (tml. 58b)
7 - Terminal 30
8 - Terminal 31
Multipin plug connection B, 8-pin
1 - Speaker + rear right
2 - Speaker - rear right
3 - Speaker + front right
4 - Speaker - front right
5 - Speaker + front left
6 - Speaker - front left
7 - Speaker + rear left
8 - Speaker - rear left
Multipin plug connection C, part 1, yellow
1 - Line Out rear left, LR
2 - Line Out rear right, RR
3 - Line Out, earth
4 - Line Out left front, LF
5 - Line Out right front, RF
6 - Switched positive for sound amplifier
Multipin plug connection C, part 2, green
7 - Telephone input signal, TEL+
8 - Second display CLOCK (for radio sets with CAN databus communication CAN High)
9 - Second display DATA (for radio sets with CAN databus communication CAN Low)
10 - Second display ENA (not assigned for radio sets with CAN databus communication)
11 - Remote control, REM (not assigned for radio sets with CAN databus communication)
12 - Telephone input signal, TEL-
Multipin plug connection C, part 3, blue
13 - CD changer, DATA IN
14 - CD changer, DATA OUT
15 - CD changer, CLOCK
16 - CD changer, voltage supply (+), terminal 30
17 - CD changer, control signal
18 - CD changer, left and right channel, earth
19 - CD changer, left channel, CD/L
20 - CD changer, right channel, CD/R
  S91-0021

Radio systems II > < Replacing aerial cables