skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing lock cylinder > < Steering column switch

Fabia Mk1

Removing and installing steering column switch
Removing and installing steering column switch
Removing
–  Remove steering wheel → Body Work; Rep. Gr.69.
–  Remove the resetting ring together with the slip ring → Body work; Rep. Gr.69.
   
–  Slacken clamping screw -2- (2.8 Nm) and remove the steering column assembly switch.
Install
If the steering column switch has been taken off, it is necessary to set the clearance -a- between steering wheel and coil spring housing.
–  Install the steering column switch.
–  Install steering wheel → Body Work; Rep. Gr.69.
–  Align the steering column switch so that it is horizontal.
  A48-0122
–  Now set the clearance -a-.
1 - Steering wheel
2 - Housing for coil spring
3 - Clamping screw for steering column switch
a - approx. 2.5 mm
–  Further installation occurs in reverse order.
  A48-0128

Removing and installing lock cylinder > < Steering column switch