skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing bottom trim panel of pillar B > < Removing and installing top trim panel of pillar B (vehicles without head airbag)
Removing and installing top trim panel of pillar B (vehicles with head airbag)
Removing and installing top trim panel of pillar B (vehicles with head airbag)
  WARNING
Safety measures should be observed when handling the airbag units → Chapter.
Disconnect battery earth strap → Electrical System → Rep. gr.27.
  Note
Violent disassembly of the upper trim panel for pillar B poses the risk of triggering the head airbag.
Removing:
–  Unclip trim with airbag -3- logo.
–  Further removal occurs as for vehicles without head airbag.
Installing:
–  Installation is carried out in the reverse order; pay attention to the following points:
t  Recondition the clips in the top trim panel of pillar B or replace with new ones.
  WARNING
Pay attention to the sequence when connecting the battery → Electrical System → Rep. gr.27.
   

Removing and installing bottom trim panel of pillar B > < Removing and installing top trim panel of pillar B (vehicles without head airbag)