skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the foot controls as of MY 2011 > < Summary of components: brake pedal as of MY 2011

Fabia Mk2

Separating the brake pedal from the brake servo unit and clipping as of MY 2011
Separating the brake pedal from the brake servo unit and clipping as of MY 2011
Special tools and workshop equipment required
t  Release tool -T10159A-
Separate
   
–  Press the brake pedal towards the brake servo unit and hold it in position.
2 - Pressure rod
3 - Retaining lugs
–  Insert release tool -T10159A- and pull it in the direction of the driver's seat while counterholding the brake pedal (the pedal must not move backwards during this operation). This causes the retaining lugs -3- of the support to be pressed off the spherical head of the push rod -2-.
The fig. shows the separation of the brake pedal from the brake servo unit with the foot controls removed for clarity.
–  Pull the release tool -T10159A- and brake pedal jointly towards the driver's seat. (This causes the brake pedal to be drawn off the ball knob of the pressure rod).
Assembling together:
  N46-10186
–  Hold the spherical head of the push rod in front of the support and press the brake pedal towards the brake servo unit until the spherical head locks audibly into place.
–  Check that it is correctly locked in place by briefly pulling on the brake pedal.
  N46-10185

Removing and installing the foot controls as of MY 2011 > < Summary of components: brake pedal as of MY 2011