–
| Unscrew left screw -1- for assembly carrier -4-, screw in fixing bolt - T10096- and tighten to 20 Nm. |
–
| Unscrew right screw -1- for assembly carrier (not shown in figure), screw in fixing bolt - T10096- and tighten to 20 Nm. |
–
| Unscrew bolts -3- on both sides. |
–
| Unscrew the left screw -2- and remove support -5-. |
–
| Screw in fixing bolts of -T10096 - and tighten to 20 Nm. |
–
| Unscrew the right screw -2- and remove support -5-. |
–
| Screw in fixing bolts of -T10096 - and tighten to 20 Nm. |
The alignment of the assembly carrier is completed once all 4 screws (Pos. -1- and -2- on both vehicle sides) are consecutively replaced with the fixing bolts. |
|
|
|