Wheel-bearing housing to suspension strutt
| Use new screws and nuts! |
| 60 Nm + 90° |
Twelve-point nut for securing the drive shaft to wheel hubt
| Do not grease thread of the outer joint of the drive shaft. |
| 50 Nm + 45° |
Track rod end to steering arm | 20 Nm + 90° |
Steering joint to track control arm | 20 Nm + 90° |
FS-III brake caliper to wheel bearing housing | 28 Nm |
Brake carrier with C54 brake caliper to wheel bearing housing | 125 Nm |
Coupling rod to anti-roll bar | 40 Nm |
Speed sensor to wheel-bearing housing | 8 Nm |
Wheel bolts | → Chapter |