–
| Unplug connector -1- from the engine control unit. |
–
| Disconnect plug connection -2-. |
–
| Unclip cable clip -3--arrows-. |
Engine is removed together with wiring loom. |
–
| Disconnect all cables for the engine, gearbox, starter motor and radiator which are will get in the way during removal. |
–
| Remove the coolant hose which connects the coolant regulator to the heat exchanger. |
–
| Remove the vacuum hose from the brake servo unit. |
WARNING The fuel system is under pressure! Before opening the system lay cleaning cloths around the connection point. Reduce pressure by carefully releasing the connection point. |
|
|
|
|