Slacken double clamp between pre-exhaust pipe and middle and rear part of exhaust system.
–
Push the middle and rear part of the exhaust system forward until the dimension -a- = 3 ... 7 mm is obtained on the retaining strap/middle part of the exhaust system.
–
Tighten nuts of double clamp to 23 Nm.
Align exhaust tailpipe
–
Align rear silencer in such a way that there is an equal distance -a- right and left between bumper opening and exhaust tailpipe.
–
For centering the exhaust tailpipe, if necessary loosen the suspension of the rear silencer.