–
| Screw adapter -V.A.G 1318/20-1- onto adapter -V.A.G 1318/20- (T-piece). |
–
| Turn the valve at T-piece anti-clockwise, until it is fully opened. |
–
| Screw adapter -V.A.G 1318/20- fully onto the vent valve on the fuel strip. |
–
| Connect hose with catch pan to adapter -V.A.G 1318/20-1-. |
–
| Screw valve at T-piece clockwise up to the stop into the vent valve. |
–
| Check the adapter and hose connections for leaktightness. |
–
| Activate remote control -V.A.G 1348/3A-. |
–
| As soon as fuel flows out of the hose without bubbles, unscrew valve at T-piece anti-clockwise, until no more fuel escapes. |
–
| Cover ventilation valve with a clean cloth. |
–
| Throttle the bleeder hose and pull off from adapter -V.A.G 1318/20-1-. |
–
| Unscrew adapter -V.A.G 1318/20- (T-piece) from the vent valve on the fuel strip. |
–
| Screw cap onto the vent valve on the fuel strip. |
|
|
|