–
| Push slides -1- fully in -arrows-. |
–
| Take filter cover -3- down and off. |
–
| Pull dust and pollen filter -2- down and out by the tab. |
Installation is carried out in the reverse order. Pay attention to the following: |
t
| Before installing check the fitting position of the filter insert. The top and bottom fin of the filter insert must be in the frame. |
t
| The 2 arrows on the frame and filter insert point to the flow direction. |
t
| The frame grid must point to the distributor housing. |
t
| The filter cover -3- must be correctly positioned in the housing and the slides -1- must be pushed fully outwards up to the stop. |
|
|
|