Fabia Mk2
Summary of components: Heat exchanger, Heating element for additional air heating -Z35- |
1 - | Bottom part of distributor housing |
2 - | Heating element for air auxiliary heating -Z35- |
q | only fitted on certain models |
q | when temperature button on control is turned to „warm“ (microswitch) is regulated by the engine control unit and 2 relays in 3 speeds in line with ambient temperature, coolant temperature and alternator load. |
q | Check relay for additional air heater heating element -Z35- → Vehicle diagnostic, testing and information system VAS 5051 |
q | Check additional heater heating element -Z35- → Current flow diagrams, Electrical fault finding and Fitting locations |
3 - | Heat exchanger |
q | with sticker for feed and return flow line - Pos. 4 |
q | removing and installing → Chapter |
q | check fitting position: |
t | Sticker must point upwards |
t | Pipe connections must be centred in the opening of the bottom part of distributor housing - Pos. 1, -arrow- |
4 - | Sticker on heat exchanger for feed and return flow line |
q | in direction of travel: feed on left, return flow on right |
5 - | Gasket with holder |
6 - | Gasket in assembly plate |
7 - | O-rings |
q | replace |
8 - | Connection fitting for heat exchanger |
q | various versions |
9 - | 20 Nm |