Fabia Mk2
|
Note| t | Summary of components - Hydraulics → Chapter. |
| t | After the battery earth strap is disconnected and re-connected, carry out additional operations → Electrical System; Rep. gr.27. |
| t | Grease all bearing points and contact surfaces with Polycarbamide Grease -G 052 142 A2-. |
| t | Prior to working on the foot controls remove the storage area on the driver's side → Body Work; Rep. gr.70. |
| 1 - | Front wall |
| q | with mount for bearing bracket and master cylinder |
| 2 - | Gasket |
| q | always replace → Electronic Catalogue of Original Parts |
| 3 - | Bearing bracket |
| q | for attaching clutch pedal |
| 4 - | Screw |
| 5 - | Gas/brake foot controls |
| 6 - | 25 Nm |
| q | self-locking |
| q | for bracket on front wall |
| q | always replace → Electronic Catalogue of Original Parts |
| 7 - | Clutch pedal switch -F36- |
| q | Difference between clutch pedal switch → Fig. |
| q | Assignment → Electronic Catalogue of Original Parts |
| q | Removing and installing → Chapter angular clutch pedal switch |
| q | Removing and installing → Chapter cylindrical clutch pedal switch |
| 8 - | Over-centre helper spring |
| q | removing and installing → Chapter |
| 9 - | Bushing |
| 10 - | Bearing bolt |
| 11 - | Clutch pedal |
| q | removing and installing → Chapter |
| 12 - | Support |
| q | only replace if the master cylinder has been removed |
| q | removing and installing → Chapter |
| 13 - | 25 Nm |
| q | self-locking |
| q | for master cylinder to front wall |
| q | always replace → Electronic Catalogue of Original Parts |
| 14 - | Master cylinder |
| q | removing and installing → Chapter |
| 15 - | Clamp |
| q | to remove and install the tube-hose line pull out retaining clip up to the stop |
| 16 - | Tubing |
| q | out of plastic → Fig. |
| 17 - | Bearing |
| q | for over-centre helper spring |
| q | insert in bearing bracket |
| q | always replace → Electronic Catalogue of Original Parts |
| q | Fitting position: the peg -arrow- clips into the master cylinder recess |
| 18 - | Screw |
| q | for pedal stop on bracket |
| 19 - | Pedal stop |
| q | screw onto bracket with screw Pos.18 with the master cylinder installed |
| 20 - | 25 Nm |
| q | self-locking |
| q | always replace → Electronic Catalogue of Original Parts |
|
|
|
|
