Fabia Mk2
| Removing and installing gearbox housing cover and 5th gear |
| 1 - | 18 Nm |
| q | for cover to gearbox housing |
| 2 - | Cover for gearbox housing |
| q | as of 08.10, with magnet on the inside → Electronic Catalogue of Original Parts |
Note| If the gearbox housing cover is fitted with the gearbox mounted, inspect the gear oil level, if necessary top up with gear oil → Chapter. |
| 3 - | Gasket |
| 4 - | 80 Nm and torque a further 90° |
| q | holds disc spring in position with sleeve socket on screw head |
| q | always replace → Electronic Catalogue of Original Parts |
| q | Clean the threaded holes for the fixing screws of the synchronizer body and the 5th gear pinion using a screw-tap in order to remove locking agent residues; otherwise there is a risk that the screws will shear |
| 5 - | Disc spring |
| q | installing → Fig. |
| 6 - | 25 Nm |
| q | for bearing pins on the gearbox housing |
| 7 - | Bearing pins |
| 8 - | 5th gear shift fork |
| q | disassembling and assembling → Chapter |
| q | adjust → Fig. |
| 9 - | Spring |
| q | Fitting position → Chapter |
| 10 - | 5th gear sliding sleeve |
| q | Fitting position → Chapter |
| 11 - | Arresters |
| q | (3 pieces) |
| q | Fitting position → Chapter |
| 12 - | Synchronizer body with sliding gear and synchronizer ring for 5th gear |
| q | remove separately → Chapter |
| q | remove together with gearbox housing → Chapter |
| q | disassembling and assembling → Chapter |
| 13 - | Needle bearing |
| q | for 5th gear sliding gear |
| 14 - | 5th gear pinion |
| q | remove separately → Chapter |
| q | remove together with gearbox housing → Chapter |
| q | Fitting position → Fig. |
|
|
|