| Checking operation of the ignition key anti-removal lock (Rapid, Superb II and vehicles Fabia II and Roomster as of 11.11) |
| –
| After reaching the position „ignition on“ turn the key slightly to the right (do not start engine). |
| –
| Depress brake pedal and hold pressed. |
| l
| Shifting the selector lever out of the position „P“ when the lock button is pressed at the grip of the selector lever must be possible without „jerking“. |
| l
| The key cannot be withdrawn from the ignition starter switch in any other selector lever position except in the position „P“. |
| –
| Shift selector lever into position „P“. |
| l
| Only withdraw the key from the ignition starter switch if the selector lever is in position „P“. |
| l
| The selector lever cannot be shifted out of position „P“ when the button is pressed and the brake pedal is actuated. |
| If the ignition key removal lock does not function as described: |
| t
| Inspecting and adjusting the selector lever control cable → Chapter. |
|
|
|
