Do not slacken the fixing nut -arrow-, the unit mounting for the engine cannot be disassembled.
A -
20 Nm + torque a further 90° (1/4 turn) - replace
B -
30 Nm + torque a further 90° (1/4 turn) - replace
Unit mounting for gearbox
1 -
50 Nm + torque a further 90° (1/4 turn) - replace
2 -
40 Nm + torque a further 90° (1/4 turn) - replace
Pendulum support
Note
t
Position the screws -A- in the elongated holes of the pendulum support in such a way that there is maximum distance between the gearbox and the assembly carrier.
t
The screwed connection -arrow- must not be loosened.