skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing the gasket ring for the crankshaft on the flywheel side > < Removing and installing gasket rings and flywheel

Fabia Mk2

Replacing crankshaft seal on belt pulley side
Replacing crankshaft seal on belt pulley side
Removing
–  Remove V-ribbed belt → Chapter.
–  Remove belt pulley - crankshaft and housing → Chapter.
   
–  Remove the gasket ring carefully using a screwdriver -A-.
  Note
The adhesive surface must not get damaged when removing the gasket ring.
Install
Special tools and workshop equipment required
t  Thrust piece -T40008-
  Note
The sealing lips of the gasket ring must be neither oiled nor greased.
  S13-0313
–  Position the gasket ring on the steering wheel housing and drive in using a pressure piece -T40008- down to the stop on the device.
–  Carefully place a new grease and oil free housing (Pos. 3) into the gasket ring → Chapter.
Further installation occurs in reverse order.
  S13-0314

Replacing the gasket ring for the crankshaft on the flywheel side > < Removing and installing gasket rings and flywheel