Fabia Mk2
Oil filter holder and engine oil cooler - Summary of components |
Caution
|
Oil pressure switch -F1- → Chapter, Pos. 17. |
1 - | Screw cap, 25 Nm |
q | slacken and tighten with oil filter wrench -3417- |
2 - | O-ring |
q | replace |
3 - | O-ring |
q | replace |
4 - | O-ring |
q | replace |
5 - | Oil filter element |
q | pull off from cap -Pos. 1- |
q | replace O-rings -Pos. 2-, -Pos. 3-, -Pos. 4- if oil filter element is changed |
q | Check fitting position |
q | Pay attention to change intervals: |
t | → BookletFabia II |
t | → BookletRoomster |
6 - | Engine oil cooler |
q | connection diagram for coolant hoses → Chapter |
q | removing and installing → Chapter |
7 - | 11 Nm |
q | tighten crosswise |
8 - | Gasket |
q | replace |
q | do not oil |
q | insert in the grooves at the oil filter holder |
9 - | 14 Nm + torque a further 90° (1/4 turn) |
q | replace |
q | tighten crosswise |
10 - | Oil filter holder |
q | with integrated return-flow check tube |
q | removing and installing → Chapter |
11 - | Gasket |
q | replace |
q | do not oil |
q | insert in the grooves at the oil filter holder |