Fabia Mk2
Air filter - Summary of components |
1 - | Inlet connection |
q | with captive screw, 9 Nm |
2 - | Clamp |
3 - | Heating for crankcase ventilation |
q | for vehicles in cold climatic zones |
4 - | Bleeder hose |
q | to charge pressure control solenoid valve -N75- → Chapter „Connection diagram for vacuum hoses“ |
5 - | Spring strap clamp |
6 - | Air intake hose |
q | to exhaust gas turbocharger |
7 - | Hose |
q | for crankcase ventilation |
q | to remove, press release buttons |
8 - | 2 Nm |
9 - | Air mass meter -G70- |
10 - | O-ring |
q | replace if damaged |
11 - | 8 Nm |
12 - | Air filter top part |
13 - | Hose |
q | for preheating |
q | for vehicles in cold climatic zones |
14 - | Air filter element |
q | to remove, turn 1/4 turn to the left |
q | Pay attention to change intervals: |
t | → BookletFabia II |
t | → BookletRoomster |
15 - | 8 Nm |
16 - | Rubber bearing |
q | replace if damaged |
17 - | Air filter bottom part |
18 - | Inlet connection |
q | screwed onto lock carrier |
19 - | 2 Nm |
20 - | Air intake hose |
21 - | Drain pipe |
q | Check fitting position |
22 - | Rubber bearing |
q | replace if damaged |