skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing coolant recirculation pumpV50 > < Removing and installing belt pulley for coolant pump

Fabia Mk2

Removing and installing coolant pump
Removing and installing coolant pump
Special tools and workshop equipment required
t  Catch pan, e.g. -VAS 6208-
Removing
  Note
t  The integrated gasket of the coolant pump must not be separated from the coolant pump.
t  If damage and leak present, replace coolant pump with gasket completely.
–  Drain the coolant from the cooling system → Chapter.
–  Remove belt pulley for control pump → Chapter.
   
–  Disconnect the vacuum line -1- of the solenoid valve for coolant circuit -N492- from the coolant pump.
–  Release screws -arrows- and remove coolant pump.
Install
Installation is performed in the reverse order, pay attention to the following points:
t  Tightening torque: 9 Nm
–  Install belt pulley for coolant pump → Chapter.
–  Top up and bleed cooling system → Chapter.
  A19-11044

Removing and installing coolant recirculation pumpV50 > < Removing and installing belt pulley for coolant pump