–
| Release screw -3- and remove coolant recirculation pump -V50- from bracket. |
–
| Place a catch pan -VAS 6208- under the engine. |
–
| Pinch off coolant hoses -2- with hose clamps -MP7-601- and detach the hoses from the coolant recirculation pump -V50-. |
t
| Tightening torque: 8 Nm. |
Installation is performed in the reverse order, pay attention to the following points: |
–
| Inspect coolant level, if necessary top up cooling system and bleed → Chapter. |
|
|
|