skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Rear seats > < Removing and installing the rear seat height adjustment on electrically operated seats

Octavia Mk1

Removing and installing the drive of the backrest inclination for electrically operated seats
Removing and installing the drive of the backrest inclination for electrically operated seats
Removing
–  Remove electrically operated seat → Chapter
–  Remove right and left cover for electrically operated seat → Chapter.
–  Loosen the cover in the lower area of the backrest and roll upwards → Chapter.
   
–  Disconnect plug connection -1-.
–  Lever off the circlip -5- with a screwdriver from the shaft -4-.
–  Slide the shaft -4- approx. 150 mm into the backrest frame.
–  Release screw -3-.
–  Remove drive of backrest inclination -2-.
Install
Installation is carried out in the reverse order.
  S72-0096

Rear seats > < Removing and installing the rear seat height adjustment on electrically operated seats