skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the drive of the backrest inclination for electrically operated seats > < Removing and installing the front seat height adjustment on electrically operated seats

Octavia Mk1

Removing and installing the rear seat height adjustment on electrically operated seats
Removing and installing the rear seat height adjustment on electrically operated seats
Removing
  Note
As far as possible remove the seat length adjustment unit for electrically operated seats at the stop above.
–  Remove electrically operated seat → Chapter
–  Remove the trims of the electrically operated seats → Chapter.
   
–  Disconnect plug connection -1-.
–  Disconnect electrical wiring from the drive motor.
–  Release screws -3-.
–  Take out rear seat height adjustment -2-.
Install
Installation is carried out in the reverse order.
  S72-0063

Removing and installing the drive of the backrest inclination for electrically operated seats > < Removing and installing the front seat height adjustment on electrically operated seats