Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Drive unit | 1.6 ltr./74 kW Engine - Mechanical Components | Enginecrankshaft group, pistons | Removing and installing crankshaft

Removing and installing pressure plate

Special tools and workshop equipment required

t	Torque wrench 40 to 200 Nm (e.g. -V.A.G 1332 -)

t	Counterholder for clutch -MP 1-221-

–	Put the counterholder -MP 1-221- into the bore hole on the cylinder block and screw onto the pressure plate.

–	Release screws for pressure plate.

Note

Replace screws for pressure plate.

–	Tighten bolts to 60 Nm and torque a further 90° ¹/₄ turn.

Skoda Workshop Service and Repair Manuals