skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing exhaust manifold > < Removing and installing parts of the exhaust system

Octavia Mk1

Removing and installing front exhaust pipe
Removing and installing front exhaust pipe
Special tools and workshop equipment required
t  Torque wrench 5 to 50 Nm (e.g. -V.A.G 1331-)
Removing
  Note
t  Avoid a large deflection of decoupling element, max. deflection 10 °.
t  Always replace self-locking nuts.
   
–  Unbolt protective cover -arrows-, separate plug connection for lambda probe.
–  Unscrew front heat shield.
–  Unscrew clamping sleeve.
–  Unbolt front exhaust pipe from exhaust manifold.
–  Swivel front exhaust pipe down 180° and take off.
Install
  A26-0142
Tightening order of front exhaust pipe to exhaust manifold
  N26-0008
ComponentsNm
Front exhaust pipe to exhaust manifold40 → Note
Lambda probe to front exhaust pipe50 → Note
Nuts for clamping sleeve40
Shielding for drive shaft to cylinder block35

1)  Coat with hot bolt paste -G 052 112 A3-.
–  Align exhaust system free of stress → Chapter.
–  Interrogating fault memory: → 1.6 ltr./74 kW Motor, Simos 2 Injection and ignition system; Rep. Gr. 01
   

Removing and installing exhaust manifold > < Removing and installing parts of the exhaust system