–
| Fill up coolant up to max. marking on the expansion reservoir. |
–
| Start engine and run for not more than 2 minutes at 1500 rpm; at the same time fill up coolant up to overflow hole on the compensation bottle. |
–
| Seal expansion reservoir. |
–
| Run engine until fan starts. |
–
| Inspect coolant level. When engine is at operating temperature the coolant level must be at the maximum marking, when engine is cold between the minimum and the maximum markings, if necessary, top up with coolant. |
WARNING Hot steam may escape when the expansion reservoir is opened, cover the cap with a cloth and open carefully. |
|
|
|
|