Parts of the Cooling System |
Note t
| When the engine is warm the cooling system is under pressure. Reduce pressure before repairs. |
t
| The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips. |
t
| Use pliers for spring strap clips to fit the spring strap clips. |
t
| Always replace seals and gasket rings. |
t
| When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection and hose). |
t
| The connection diagram for the coolant system can slightly differ from the individual engine identification characters. |
t
| Draining and filling up coolant, coolant mixture ratio and Checking the coolant system for tightness → Chapter. |
–
| after replacing fill entire system with fresh coolant |
–
| only for automatic gearbox |
|
|
|